Mechanical behavior of porous solid considering mesoscopic elastic buckling     

Hao-Yue Zhang  Xiao-Xong Hu  Gao-Feng Zhao 《国际地质力学数值与分析法杂志》2020,44(7):962-982

In this work, the elastic buckling of porous solids was investigated using a lattice spring model (LSM). The capability of the LSM to solve elastic buckling problems was comprehensively verified by comparing well-established numerical and analytical solutions. Following this, the buckling of a porous solid was studied, in which two porous structures were considered, ie, the random porous model and the Voronoi porous model. The results reveal that both the porosity and the shape of the pores influence the elastic buckling bearing capacity of the porous solid. Finally, the mechanical responses of a porous solid with an extra high porosity (0.85) were numerically investigated. Our numerical results demonstrated that the nonlinear elastic response of the porous solid might come from its mesoscale elastic buckling. This work shows the ability and promise of using the LSM as a fundamental numerical tool for the deep investigation of the buckling mechanical behavior of porous solids.  相似文献   

非线性波消波及波场分布研究   总被引：1，自引：1，他引：0  

王巧莎  李明海 《海洋科学》2018,42(6):30-38

本文基于雷诺平均N-S方程,并结合RNG k-e方程建立了粘性数值波浪水槽,对不同波陡、不同相对水深、不同相对波高的非线性规则波的阻尼消波问题和波场分布进行研究。文中提出了两种描述消波区内部阻尼变化的阻尼函数,分别适用于小波陡情形和高波陡情形。研究结果表明,小波陡组消波区可设为一个波长,阻尼系数取10~4～10~5即可满足消波要求,计算结果与实验结果及造波理论吻合良好;高波陡组消波区可设为两个波长,阻尼系数取10~4～10~5亦可满足消波要求,计算结果与实验结果吻合良好。此外,当波陡较小时,波场内反射情况的小幅改变即可对整个波场造成影响,特别是当水深较浅时这种影响极为明显,需谨慎考虑。当波陡较大时,水波能量较高,整个波场沿水波传播方向可观测到明显的衰减现象,在具体试验中需进行考虑。  相似文献   

Comprehensive study of the drying behavior of Boom clay: Experimental investigation and numerical modeling          下载免费PDF全文

Julien Hubert  Erwan Plougonven  Noémie Prime  Angélique Léonard  Frédéric Collin 《国际地质力学数值与分析法杂志》2018,42(2):211-230

This paper presents a thermo‐hydro‐mechanical framework to model the drying behavior of Boom clay. First, the experimental campaign conducted Noémie Prime is briefly presented because it is used to validate the model. The data acquisition and processing is emphasized because of the use of X‐ray microtomography to be able to more accurately compare experimental and numerical strain fields. The different submodels are introduced. Numerical simulations are performed to illustrate the capability of the proposed model to reproduce the observed behavior. Finally, a comprehensive sensitivity study on several key model parameters associated with the water retention curve, and the permeability of the medium, is performed to get a better understanding of the physics behind the coupled model.  相似文献   

The recognition of former melt flux through high‐strain zones          下载免费PDF全文

Catherine A. Stuart  Sandra Piazolo  Nathan R. Daczko 《Journal of Metamorphic Geology》2018,36(8):1049-1069

High‐strain zones are potential pathways of melt migration through the crust. However, the identification of melt‐present high‐strain deformation is commonly limited to cases where the interpreted volume of melt “frozen” within the high‐strain zone is high (>10%). In this contribution, we examine high‐strain zones in the Pembroke Granulite, an otherwise low‐strain outcrop of volcanic arc lower crust exposed in Fiordland, New Zealand. These high‐strain zones display compositional layering, flaser‐shaped mineral grains, and closely spaced foliation planes indicative of high‐strain deformation. Asymmetric leucosome surrounding peritectic garnet grains suggest deformation was synchronous with minor amounts of in situ partial melting. High‐strain zones lack typical mylonite microstructures and instead display typical equilibrium microstructures, such as straight grain boundaries, 120° triple junctions, and subhedral grain shapes. We identify five key microstructures indicative of the former presence of melt within the high‐strain zones: (a) small dihedral angles of interstitial phases; (b) elongate interstitial grains; (c) small aggregates of quartz grains with xenomorphic plagioclase grains connected in three dimensions; (d) fine‐grained, K‐feldspar bearing, multiphase aggregates with or without augite rims; and (e) mm‐ to cm‐scale felsic dykelets. Preservation of key microstructures indicates that deformation ceased as conditions crossed the solidus, breaking the positive feedback loop between deformation and the presence of melt. We propose that microstructures indicative of the former presence of melt, such as the five identified above, may be used as a tool for recognising rocks formed during melt‐present high‐strain deformation where low (<5%) volumes of leucosome are “frozen” within the high‐strain zone.  相似文献   

Clogging of saturated porous media by silt‐sized suspended solids under varying physical conditions during managed aquifer recharge          下载免费PDF全文

Xinqiang Du  Xueyan Ye  Xiaowan Zhang 《水文研究》2018,32(14):2254-2262

Managed aquifer recharge is an effective method for utilizing excess flood flows, but clogging of porous media is a limiting factor in the implementation of this water storage technique. In recent years, much research on the physical clogging of porous media during artificial recharge has been conducted. However, the understanding of clogging due to silt‐sized suspended solids (SS) is still inadequate, especially under varying physical conditions. Here, we subjected sand columns to controlled rates of flow and SS suspensions to investigate the influence of media size, SS size, SS concentration, and flow velocity on the clogging of porous media by silt‐sized SS. The results show that the diameter ratio of SS particles to sand grains is the dominant factor influencing the position of physical clogging. As pore velocity increased, the mobility of silt‐sized SS was enhanced and retention in the porous media decreased noticeably. The spatial retention profiles in the porous media were found to vary greatly at different flow velocities. The SS concentration of the infiltrating suspension also dramatically influenced the mobility and deposition of silt‐sized SS particles, such that high concentrations accelerated the clogging process. As the different physical factors changed, the breakthrough curves and retention profiles of silt‐sized SS particles changed obviously and the mechanisms of retention differed. On the whole, clogging position is mainly determined by particle size ratio, but clogging rate is dominated by a variety of factors including particle size ratio, SS concentration, and flow velocity.  相似文献   

新疆三塘湖盆地上石炭统近源凝灰岩致密油藏形成条件     

陈常超  黄志龙  陈旋  安成龙  王昕  李新宁 《地质通报》2018,37(1):83-92

三塘湖盆地上石炭统烃源岩是火山喷发环境下形成的,烃源岩往往与厚度不等的凝灰岩交互出现,但凝灰岩致密储层的厚度和物性差异较大,源储关系较复杂,因而近源凝灰岩致密油藏的形成需要特定的条件。为了认识三塘湖盆地上石炭统近源凝灰岩致密油藏的形成条件,以典型致密油藏M36为例,综合运用岩心、薄片、测录井、地球化学测试等资料,对成藏要素进行解剖,建立上石炭统凝灰岩致密储层及烃源岩有效性的评价标准,并总结出近源致密油藏成藏模式。结果表明,储层孔隙度大于5%、对应渗透率大于0.07×10-3μm2的凝灰岩可以作为有效储层;烃源岩有机碳含量在4.0%以上,对应生烃潜量大于10%,且Ro大于0.8%的高炭泥岩、暗色泥岩为优质烃源岩;较好的储层、优质的烃源岩和互层型源储配置关系是近源凝灰岩致密油藏的形成条件。  相似文献   

雪宝顶流域钙华景观生态风险评价的研究探讨     

李相邑  代群威  党政  罗尧东  崔杰  董发勤  张婷 《中国岩溶》2021,40(1):140-146

景观生态风险评价能够有效地对区域景观格局进行优化并为风险防范提供理论基础。文献计量学分析表明,国内岩溶景观生态风险评价研究主要从“研究对象”、“评价模型”、“评价方法”和“评价指标”4个方面分析;而钙华作为特殊的岩溶体,目前对它的生态风险评价几乎未开展。文章从岩溶景观生态风险评价入手,基于模糊数学综合评判法和层次分析法,提出以地表钙华体与地表水循环作为景观主体,并对主体因素逐步细化,形成多层次综合评价模型,展开对雪宝顶流域钙华景观的生态风险评价。   相似文献   

九寨沟“8.8”地震背景下火花海钙华坝体无损探测分析     

罗尧东  代群威  董发勤  王富东  赵学钦  廖传康  崔杰  李琼芳  王安平 《中国岩溶》2021,40(1):147-156

为研究震后九寨沟钙华景区的溶洞、裂隙、暗流等地质特性,丰富钙华景区岩溶洞穴无损探测技术,探讨了多物探技术在多孔疏松钙华地区作业的可靠性。首次运用地质雷达法及高密度电法相结合的无损探测技术,在九寨沟景区火花海特定区域进行了现场勘查和无损探测试验。结合对比两种无损探测成果与测区内出露地质剖面3组勘探数据,结果发现:高密度电法与地质雷达法相结合,两者能优劣互补,相互佐证,在解决钙华区域浅部溶洞、暗流、裂隙等工作中,对探测目标体具有极高的识别度。两种方法探测数据与震后出露剖面地质特征保持极高的一致性,验证了两种无损检测方法在多孔疏松介质条件下数据的真实可靠性,解决了多物探技术在多孔疏松介质地区施工的疑点和难点,丰富了工程物探领域技术。   相似文献   

黔西南泥堡金矿床容矿火山岩系中“粉砂岩”夹层的岩石类型归属研究          下载免费PDF全文

祁连素 《贵州地质》2021,38(1):22-28, 64

原先认为泥堡金矿床容矿火山岩系中间的"粉砂岩夹层",研究发现其具有与火山碎屑岩的成分与结构构造特征,包括熔蚀石英晶屑和长石板状晶假象,局部还出现大量生物化石碎片,应归属为蚀变凝灰岩。火山岩系的原"粉砂岩夹层"并不存在,只是短暂的火山喷发间隙,整个容矿火山岩系形成从偏基性火山碎屑岩到中基性火山角砾岩的晚二叠世火山喷发旋回。火山岩旋回的早期到晚期,金矿成矿作用强度逐渐增强,印证金成矿作用与火山岩的密切成因联系。  相似文献   

中祁连地块西段青白口系其它大坂组英安质凝灰岩LA- ICP- MS锆石U- Pb年龄及其地质意义     

张金明  陈光庭  才航加 《地质论评》2023,69(2):747-760

新元古界青白口系其它大坂组是中祁连地块西段基底岩系之一,对研究中祁连地块元古宙地质构造演化具有重要意义。笔者等通过1∶5万区调工作在其它大坂组中发现了英安质晶屑岩屑凝灰岩夹层,并对凝灰岩进行了锆石U-Pb年代学、岩石地球化学研究。测年结果表明样品中锆石年龄主要分3组。结合区域地质资料,笔者等认为第一组锆石(1456～1524 Ma)和第二组锆石(1018～1021 M)为外来锆石或/碎屑锆石,分别为物源区中元古代早期Columbia超大陆裂解事件和Rodinia大陆聚合事件(格林威尔造山作用)在中祁连地块中的响应;第三组锆石(946～964 Ma)的n(²⁰⁶Pb)/n(²³⁸U)加权年龄为958±3 Ma(MSWD=1.4),代表英安质凝灰岩的形成时代。岩石地球化学分析表明,其它大坂组英安质晶屑岩屑凝灰岩样品属于过铝质(A/CNK=1.37～1.75)、高钾(K₂O>Na₂O,K₂O=4.48%～4.86%)、钙碱性(σ=0.89～1.26)火山岩,稀土总量为(149....  相似文献